How to Fold the Panther Paper Airplane

Step by Step Instructions on How to Make the Panther Paper Airplane

ExtremePaperAirplanes Youtube Channel

You can watch a step by step video instruction of Panther Paper Airplane here. >>>

Step  by Step Instructions on 

How to Make the Panther Paper Airplane

Looking very much like the real stealth bomber, this craft flies long distances in silence as a stealth craft must.

Based on a design by Kunihiko Kashara

Difficulty: Moderate

Paper Size: Letter

1. Fold the paper along the long edge. Leave about one finger width at the bottom edge.

2. Fold the paper left point down so the left edge of the paper lines up with the bottom edge of the top layer. Unfold after the crease has been made.

3. Fold the upper right point down so the right edge of the paper lines up with the bottom edge of the top layer. Unfold after the crease has been made.

4. Unfold the paper and lay it flat on the working surface.

5. Pop the left and right horizontal creases up, bringing the points at the ends of the creases in and down towards the center of the paper. Press the fold down and flat.

6. Fold the topmost layer back so the edges at the top of the paper line up. At the same time bring the points at the left and right edges up and in toward the middle of the paper. Two new creases are formed on each side.

7. Fold the bottom point of the lower triangle up so it hits the top point of the upper triangle. Fold about the existing crease between the two triangles. Two new creases are created as the fold is pressed flat.

8. Fold the bottom point of the lower triangle up so it hits the upper triangle. Fold about the existing crease between the two triangles. Two new creases are created as the fold is pressed flat.

9. Fold down the upper left point which was previously folded up. This creates a new crease in the top-most layer.

10. Same thing on the right. Fold down the upper right point which was previously folded up. This again creates a new crease in the top-most layer.

11. Fold the top layer on the nose down so the top edge hits the creases between the two triangles.

12. Fold the layer at the very top of the nose down over the top of the previous fold. The folded edge comes down on the top of the previous fold about halfway down.

13. Flip the paper over so all the flaps is underneath and orient with the long edge to the right.

14. Fold the plane exactly in half. Make sure the wing flaps are lined up for good balance.

15. Flip the plane over again so the nose is to the left and the central crease is at the top.

16. Make a crease for the first wing flap. The right point of the crease should be at the base of the fuselage and the left point should be about one half way down the left most edge.

17. Flip the plane over so the first wing flap is underneath and the nose points to the left.

18. Make a crease for the second wing flap. Be sure to line up the wing flaps for good balance.

19. Fold down the top wing flap. The left point of the crease should be less than half way up from the bottom edge of the fuselage and the right point should be perpendicular to the right edge.

20. Flip the plane over again so the first wing flap is underneath and the nose points to the left.

21. Make a crease for the second wing flap. Be sure to line up the wing flaps for good balance.

22. Open up the wing flaps and adjust the wing angles so they are even. Adjust the dihedral angle so that the wings are flat or slightly down. If the dihedral angle is up the plane may fly wildly or even upside down.

If you want to watch the how to make this paper airplane video of Panther Paper Airplane, you can check it out on our ExtremePaperAirplane Youtube Channel on this link: How to Make Panther Paper Airplane>>

Watch out for more designs of paper airplanes coming on the way.

You can check out Printable Patterns of this paper airplane here: Free Download Panther PDF Pattern

Like Our Facebook Page